We currently have 2 trailer hitch receivers for your 2007 Honda Fit which are the Draw-Tite Trailer Hitch part # 24776 and the Curt Trailer Hitch part # C11058. Both of these trailer hitches have a 1-1/4" receiver tube opening. The ball mount that is best suited for your vehicle and hitch is part # C45521 which also has a 1-1/4" receiver tube opening.
It is not uncommon for a bit of play to occur inside the trailer hitch receivers tube opening with the ball mount, but this can all be... view full answer...
According to B&W:
When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount... view full answer...
Neither the Curt # C13421 or the Draw-Tite # 76290 Class III hitches would require any trimming or modification of the vehicle. Both hitches install in the same manner, bolting to the underside of the frame member, and both would appear pretty identical with only the receiver tube and safety chain loop being visible under the rear bumper.
Really the only appreciable difference between the two is that the Draw-Tite # 76290 includes a horizontal bracket welded to the hitch crossbar for... view full answer...
Yes. The EcoHitch Stealth Trailer Hitch Receiver # EH84GR has safety chain loops on the downward tube that the receiver will insert into. Since it sounds like you'll be towing, you will also need a wiring harness, ball mount and hitch ball.
For wiring I recommend using the Tekonsha ZCI # 119250KIT which allows you to clamp on to the vehicle's wiring instead of splicing in, so it's a great solution for vehicles with complicated electrical systems.
For a ball mount and hitch ball I recommend... view full answer...
I can definitely see why you might think that, but an anti-rattle device is not going to compromise the shock absorption of the Convert-A-Ball Ball Mount for 2" Hitches # AMSC2. The polyurethane interior of the ball mount will continue to be effective for its intended purpose and reduce vibration, but without an anti-rattle device, the play inside a larger OEM hitch will continue.
So with that in mind I definitely recommend the Roadmaster Quiet Hitch for 2" Trailer Hitches # RM-061 which... view full answer...
A hitch ball does not come mounted to the Brophy Ball Mount with 4" Drop or 3" Rise # EA40, and there is not a way to get that as an option.
For the hitch balls that work with this mount, either the 2" Hitch Ball # EH68C-C or 2-5/16" Hitch Ball # SC30-C, you will need to torque them to 250 ft-lbs according to Brophy. If for some reason you are unable to get that installed yourself, a local installer should be able to tighten the hitch ball to the necessary ft-lbs.
I have added a link... view full answer...
Installing a trailer hitch like the Draw-Tite Hitch # 76128 will be compatible with your 2017 Honda CR-V's hands free lift gate. However, you will probably need to kick under the bumper to the left or right of the center where the hitch receiver opening will be located. This section of the hitch might partially block the sensors in this location.
If you plan on towing with this hitch, then I recommend the using the T-One Vehicle Harness, # 118741, and ball mount kit, # 989900. The harness... view full answer...
We do indeed have a trailer hitch ball mount with an 8 inch drop that fits your 2-1/2 inch hitch receiver, from Curt:
- Curt Heavy Duty Forged Ball Mount for 2-1/2" Hitch # C33JR
The # C33JR comes with the 2-5/16" hitch ball, but to secure it to your hitch you'll need Hitch Lock # e98881. view full answer...
When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot be voided.
The Curt Trailer Hitch Receiver # C11604 is confirmed to fit your 2016 Honda Civic sedan. I've linked an install video for you.
If you're going to be towing a trailer you'll also need a ball mount, hitch ball, pin and clip, and... view full answer...
When we installed Draw-Tite Class II hitch # 36416 on a 2010 Toyota Camry we found that the top of the receiver tube opening was positioned 10-1/2-inches above ground level. This is shown in the linked installation video at the :25-second mark.
Selecting the correct ball mount to keep your hitched trailer level (for the best handling) is easy; you can refer to the linked article that explains how to measure your coupler height to determine the amount of drop or rise you need. If the hitch... view full answer...
To tow a small trailer with your 2018 Ram Promaster City you will need a hitch, trailer wiring, hitch pin, ball mount and ball.
For the hitch, I recommend Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit part # 75219 which is a custom fit hitch for the Promaster that bolt right up to the existing frame holes instead of drilling. The hitch is a concealed cross tube hitch so the only portion of the hitch that is visible once installed is the receiver tube. I have attached an installation... view full answer...
For a trailer hitch for your 2009 BMW X5 you would want the Draw Tite hitch part # 75600. The install won't be too difficult but it will require some fascia trimming and temporary removal of the bumper. I attached a link to the install instructions for you to check out as well.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It... view full answer...
The rear fascia will have to come off of your 2011 Porsche Cayenne to install Draw-Tite trailer hitch # 75950 or any of the trailer hitches for the vehicle. The hitches will also pretty much take the place of the bumper beam. I have included a link to the installation instructions for you to view so you can see what all is involved in the installation.
f you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4... view full answer...
Good news! Installing a trailer hitch like the etrailer # e98903 on your 2020 Chrysler Pacifica Hybrid will not affect the operation of the hands free liftgate feature on your vehicle. You'll simply slowly kick your foot to either side of the hitch receiver to open the rear cargo hatch in the same manner that you normally would.
If you're going to be towing a trailer at all with your 2020 Pacifica Hybrid you'll need a wiring harness, ball mount and hitch ball to complete your towing setup.... view full answer...
For your 2016 Ford Edge the Draw Tite hitch part # 75234 is a confirmed fit that would work well for you. Draw Tite test this hitch on your exact vehicle and determined it to be a fit. This is a 2 inch hitch as well.
I attached an install video for you to check out as well.
For trailer wiring you would want the part # 118377.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop... view full answer...
The most popular trailer hitch for your 2016 Jeep Wrangler Unlimited is Curt Class III trailer hitch # 13432. This hitch is rated for 350 pounds tongue weight and 3,500 pounds gross trailer weight. When used with weight distribution it is rated for 400 pounds tongue weight and 4,000 pounds gross trailer weight.
Since you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch... view full answer...
The alert will most likely sound with a ball mount that close to the sensors in the Hopkins Rear View Camera with Backup Sensors, # HM60195VA. You can adjust the sensors up a little but there is still a good chance it will sound the alert. The ball mount and ball should not have an adverse effect on the focus of the image.
You could remove the ball mount before backing up so that the alert will not sound or try mounting the unit in an alternate location.
What I recommend is the Swift... view full answer...
Once the Diversi-Tech Self-Locking Adjustable Ball Mount, # DTALBM6407, is secured to your trailer hitch, the locking tabs will be flush with the side of your trailer hitch receiver tube. We have this item in stock, so I pulled one from our warehouse and installed it in a truck that we had on our lot. I have attached a drivers side and a passenger side photo showing what the locking tabs look like once this ball mount is installed.
You will not need to modify your trailer hitch to use... view full answer...
I will be happy to make some recommendations for your 2015 Nissan Xterra. First, for a trailer hitch, Curt hitch # 13514 is a very popular option. This is a Class III trailer hitch with a 2 inch receiver.
I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not... view full answer...
According to the install instructions for the Curt hitch part # C13235 (that are attached), the horizontal mounting bracket of the Curt hitch part # C13235 does have the notch like our product pictures. I can assure you the hitch you order will have it and it will fit your 1999 Isuzu Amigo.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4... view full answer...
Go To Results